Your IP : 18.220.75.213
<!DOCTYPE html>
<html>
<head>
<title>ProFTPD module mod_dso</title>
</head>
<body bgcolor=white>
<hr>
<center>
<h2><b>ProFTPD module <code>mod_dso</code></b></h2>
</center>
<hr><br>
<p>
<b>What are DSO modules?</b><br>
"On modern Unix derivatives there exists a nifty mechanism usually called
dynamic linking/loading of <i>Dynamic Shared Objects</i> (DSO) which provides
a way to build a piece of program code in a special format for loading it at
run-time into the address space of an executable program.
<p>
This loading can usually be done in two ways: Automatically by a system program
called <code>ld.so</code> when an executable program is started, or manually
from within the executing program via a programmatic system interface to the
Unix loader through the system calls <code>dlopen()/dlsym()</code>.
<p>
In the first way the DSO's are usually called <i>shared libraries</i> or
<i>DSO libraries</i> and named <code>libfoo.so</code> or
<code>libfoo.so.1.2</code>. They reside in a system directory (usually
<code>/usr/lib/</code>) and the link to the executable program is established
at build-time by specifying <code>-lfoo</code> to the linker command. This
hard-codes library references into the executable program file so that at
start-time the Unix loader is able to locate <code>libfoo.so</code> in
<code>/usr/lib/</code>, in paths hard-coded via linker-options like
<code>-R</code> or in paths configured via the environment variable
<code>LD_LIBRARY_PATH</code>. It then resolves any (yet unresolved) symbols in
the executable program which are available in the DSO.
<p>
Symbols in the executable program are usually not referenced by the DSO
(because it's a reusable library of general code) and hence no further
resolving has to be done. The executable program has no need to do anything on
its own to use the symbols from the DSO because the complete resolving is done
by the Unix loader. (In fact, the code to invoke <code>ld.so</code> is part of
the run-time startup code which is linked into every executable program which
has been bound non-static.) The advantage of dynamic loading of common library
code is obvious: the library code needs to be stored only once, in a system
library like libc.so, saving disk space for every program.
<p>
In the second way the DSO's are usually called <i>shared objects</i> or
<i>DSO files</i> and can be named with an arbitrary extension (although the
canonical name is <code>foo.so</code>). These files usually stay inside a
program-specific directory and there is no automatically established link to
the executable program where they are used. Instead the executable program
manually loads the DSO at run-time into its address space via
<code>dlopen()</code>. At this time no resolving of symbols from the DSO for
the executable program is done. Instead the Unix loader automatically resolves
any (yet unresolved) symbols in the DSO from the set of symbols exported by the
executable program and its already loaded DSO libraries (especially all symbols
from the ubiquitous <code>libc.so</code>). This way the DSO gets knowledge of
the executable program's symbol set as if it had been statically linked with
it in the first place."
<p>
<i>(Taken from <a href="http://httpd.apache.org/docs/dso.html">http://httpd.apache.org/docs/dso.html</a>)</i>
<p>
The <code>mod_dso</code> module is ProFTPD's module for handling the dynamic
loading of modules. This module is contained in the <code>mod_dso.c</code>
file for ProFTPD 1.3.<i>x</i>, and is not compiled by default. Installation
instructions are discussed <a href="#Installation">here</a>.
<p>
The most current version of <code>mod_dso</code> can be found in the
ProFTPD source distribution:
<pre>
<a href="http://www.proftpd.org/">http://www.proftpd.org/</a>
</pre>
<h2>Directives</h2>
<ul>
<li><a href="#LoadFile">LoadFile</a>
<li><a href="#LoadModule">LoadModule</a>
<li><a href="#ModuleControlsACLs">ModuleControlsACLs</a>
<li><a href="#ModuleOrder">ModuleOrder</a>
<li><a href="#ModulePath">ModulePath</a>
</ul>
<p>
<h2>Control Actions</h2>
<ul>
<li><a href="#insmod">insmod</a>
<li><a href="#lsmod">lsmod</a>
<li><a href="#rmmod">rmmod</a>
</ul>
<p>
<hr>
<h3><a name="LoadFile">LoadFile</a></h3>
<strong>Syntax:</strong> LoadFile <em>path</em><br>
<strong>Default:</strong> None<br>
<strong>Context:</strong> server config<br>
<strong>Module:</strong> mod_dso<br>
<strong>Compatibility:</strong> 1.3.0rc1 and later
<p>
The <code>LoadFile</code> directive is used to load any shared object
(<code>.so</code> file extension), such as shared libraries. On some
platforms, it may be necessary to load all of the libraries needed by
a DSO module, using <code>LoadFile</code>, prior to loading the module itself.
<p>
The <em>path</em> parameter must be the absolute path to the shared object
to load.
<p>
Example:
<pre>
# Load the zlib library
LoadFile /usr/lib/libz.so
</pre>
<p>
<hr>
<h3><a name="LoadModule">LoadModule</a></h3>
<strong>Syntax:</strong> LoadModule <em>name</em><br>
<strong>Default:</strong> None<br>
<strong>Context:</strong> server config<br>
<strong>Module:</strong> mod_dso<br>
<strong>Compatibility:</strong> 1.3.0rc1 and later
<p>
The <code>LoadModule</code> directive is used to dynamically load a module
from the configuration file.
<p>
Example:
<pre>
LoadModule mod_test.c
</pre>
<p>
<hr>
<h3><a name="ModuleControlsACLs">ModuleControlsACLs</a></h3>
<strong>Syntax:</strong> ModuleControlsACLs <em>actions|all allow|deny user|group list</em><br>
<strong>Default:</strong> None<br>
<strong>Context:</strong> server config<br>
<strong>Module:</strong> mod_dso<br>
<strong>Compatibility:</strong> 1.3.0rc1 and later
<p>
The <code>ModuleControlsACLs</code> directive configures access lists of
<em>users</em> or <em>groups</em> who are allowed (or denied) the ability to
use the <em>actions</em> implemented by <code>mod_dso</code>. The default
behavior is to deny everyone unless an ACL allowing access has been explicitly
configured.
<p>
If "allow" is used, then <em>list</em>, a comma-delimited list
of <em>users</em> or <em>groups</em>, can use the given <em>actions</em>; all
others are denied. If "deny" is used, then the <em>list</em> of
<em>users</em> or <em>groups</em> cannot use <em>actions</em> all others are
allowed. Multiple <code>ModuleControlsACLs</code> directives may be used to
configure ACLs for different control actions, and for both users and groups.
<p>
The <em>actions</em> provided by <code>mod_dso</code> are "insmod"
"lsmod", and "rmmod".
<p>
Example:
<pre>
# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loaded
ModuleControlsACLs insmod,rmmod allow user root
ModuleControlsACLs lsmod allow user *
</pre>
<p>
<hr>
<h3><a name="ModuleOrder">ModuleOrder</a></h3>
<strong>Syntax:</strong> ModuleOrder <em>...</em><br>
<strong>Default:</strong> None<br>
<strong>Context:</strong> server config<br>
<strong>Module:</strong> mod_dso<br>
<strong>Compatibility:</strong> 1.3.0rc1 and later
<p>
The <code>ModuleOrder</code> directive can be used to explicitly set the
module order. <b>Note</b>: do not use this directive unless you know what
you are doing. It is <i>very</i> easy to configure a non-working server with
this directive.
<p>
If you <i>are</i> going to use <code>ModuleOrder</code>, make sure it is
the very first directive in your <code>proftpd.conf</code> file.
<p>
Example:
<pre>
# Make this one the very first things, if you're going to use it.
ModuleOrder \
mod_core.c \
mod_cap.c \
mod_auth_unix.c \
mod_auth_pam.c \
mod_ls.c \
mod_log.c \
mod_site.c \
mod_xfer.c \
mod_auth.c \
mod_ifsession.c \
mod_auth_file.c
</pre>
<p>
<hr>
<h3><a name="ModulePath">ModulePath</a></h3>
<strong>Syntax:</strong> ModulePath <em>path</em><br>
<strong>Default:</strong> None<br>
<strong>Context:</strong> server config<br>
<strong>Module:</strong> mod_dso<br>
<strong>Compatibility:</strong> 1.3.0rc1 and later
<p>
The <code>ModulePath</code> directive is used to configure an alternative
directory from which <code>mod_dso</code> will load DSO modules. By
default, <code>mod_dso</code> uses <em>$prefix</em>/<code>libexec/</code>,
where <em>$prefix</em> is where you installed <code>proftpd</code>,
<i>e.g.</i> <code>/usr/local/</code>.
<p>
The <em>path</em> parameter must be an absolute path.
<p>
Example:
<pre>
ModulePath /etc/proftpd/libexec
</pre>
<p>
<hr>
<h1>Control Actions</h1>
<p>
<hr>
<h3><a name="insmod"><code>insmod</code></a></h3>
<strong>Syntax:</strong> ftpdctl insmod <em>module</em><br>
<strong>Purpose:</strong> Load a DSO module
<p>
The <code>insmod</code> control action can be used to load a DSO module
into the running <code>proftpd</code> daemon.
<p>
A module cannot be loaded multiple times.
<p>
Example:
<pre>
ftpdctl rmmod mod_test.c
ftpdctl: 'mod_test.c' loaded
</pre>
<p>
<hr>
<h3><a name="lsmod"><code>lsmod</code></a></h3>
<strong>Syntax:</strong> ftpdctl lsmod<br>
<strong>Purpose:</strong> Display list of all loaded modules
<p>
The <code>lsmod</code> control action is used to display a list of all
loaded modules.
<p>
Example:
<pre>
ftpdctl lsmod
ftpdctl: Loaded Modules:
ftpdctl: mod_core.c
ftpdctl: mod_xfer.c
ftpdctl: mod_auth_unix.c
ftpdctl: mod_auth_file.c
ftpdctl: mod_auth.c
ftpdctl: mod_ls.c
ftpdctl: mod_log.c
ftpdctl: mod_site.c
ftpdctl: mod_dso.c
ftpdctl: mod_ctrls.c
ftpdctl: mod_auth_pam.c
ftpdctl: mod_cap.c
</pre>
<p>
<hr>
<h3><a name="rmmod"><code>rmmod</code></a></h3>
<strong>Syntax:</strong> ftpdctl rmmod <em>module</em><br>
<strong>Purpose:</strong> Unload a DSO module
<p>
The <code>rmmod</code> control action can be used to unload a DSO module
from the running <code>proftpd</code> daemon. Note that it is also
possible to "unload" one of the staticly-linked modules; this
does not remove that module from the process' memory space, but does remove
that module from the core engine, such that <code>proftpd</code> will
act as if the module is not present.
<p>
Example:
<pre>
ftpdctl rmmod mod_test.c
ftpdctl: 'mod_test.c' unloaded
</pre>
<p>
<hr>
<h2><a name="Usage">Usage</a></h2>
Note that <code>mod_dso</code>'s control actions are only available if
your <code>proftpd</code> has been compiled with Controls support.
<p>
<hr>
<h2><a name="Installation">Installation</a></h2>
The <code>mod_dso</code> module is distributed with ProFTPD. To enable use
of DSO modules, use the <code>--enable-dso</code> configure option:
<pre>
$ ./configure --enable-dso
$ make
$ make install
</pre>
This option causes <code>mod_dso</code> to be compiled into
<code>proftpd</code>.
<p>
<b>Logging</b><br>
The <code>mod_dso</code> module supports <a href="../howto/Tracing.html">trace logging</a>, via the module-specific log channels:
<ul>
<li>dso
</ul>
Thus for trace logging, to aid in debugging, you would use the following in
your <code>proftpd.conf</code>:
<pre>
TraceLog /path/to/ftpd/trace.log
Trace dso:20
</pre>
This trace logging can generate large files; it is intended for debugging use
only, and should be removed from any production configuration.
<p><a name="FAQ">
<b>Frequently Asked Questions</b><br>
<p><a name="DSOAlreadyLoaded">
<font color=red>Question</font>: When I try to start <code>proftpd</code>, it
fails like this:
<pre>
proftpd[1234]: mod_dso/0.5: module 'mod_radius.c' already loaded
proftpd[1234]: Fatal: LoadModule: error loading module 'mod_radius.c': Operation not permitted on line 9 of '/etc/proftpd/proftpd.conf'
</pre>
How do I fix this "module already loaded" error?<br>
<font color=blue>Answer</font>: This happens when the proftpd configuration
either <i>a)</i> uses the <a href="#LoadModule"><code>LoadModule</code></a>
on a module which was compiled in as a static module, or <i>b)</i> is
inadvertently using <code>LoadModule</code> on the same module multiple times.
<p>
To check if the module has been statically compiled into your
<code>proftpd</code> executable, use the <code>-l</code> command-line parameter,
<i>e.g.</i>:
<pre>
# proftpd -l
Compiled-in modules:
mod_core.c
mod_xfer.c
mod_auth_unix.c
mod_auth_file.c
mod_auth.c
mod_ls.c
mod_log.c
mod_site.c
mod_delay.c
mod_facts.c
mod_dso.c
mod_ident.c
mod_auth_pam.c
mod_tls.c
mod_cap.c
</pre>
The modules listed via the command are the static modules. So if your
<code>LoadModule</code> directive is used for one of the modules in this list,
you can remove that <code>LoadModule</code> directive; that module will already
be loaded.
<p>
The other cause, that of having multiple <code>LoadModule</code> directives
for the same module, usually happens when your <code>proftpd.conf</code>
file includes other config files, <i>e.g.</i>:
<pre>
Include /path/to/modules.conf
</pre>
and it is those other config files which have <code>LoadModule</code> directives
of their own.
<p>
If you find yourself needs to change the configuration to work around this
error, you can use the following to see if the module has already been
loaded, and if not, load it:
<pre>
<IfModule !mod_radius.c>
LoadModule mod_radius.c
</IfModule>
</pre>
<p><a name="DSOAlreadyLoadedSpecialModules">
<font color=red>Question</font>: When I try to start <code>proftpd</code>, it
fails like this:
<pre>
proftpd[1234]: mod_dso/0.5: module 'mod_ctrls.c' already loaded
proftpd[1234]: Fatal: LoadModule: error loading module 'mod_ctrls.c': Operation not permitted on line 9 of '/etc/proftpd/proftpd.conf'
</pre>
I do not have any other <code>LoadModule</code> directives in my config, nor
is the <code>mod_ctrls</code> module in my <code>--with-modules</code>
configure option.<br><br>
<font color=blue>Answer</font>: In this particular case, the
<code>mod_ctrls</code> module is automatically compiled in, as a static module,
when the <code>--enable-ctrls</code> configure option is used. There are only
a few such modules with this special handling:
<ul>
<li><code>mod_ctrls</code> (<i>via the <code>--enable-ctrls</code> configure option</i>)
<li><code>mod_dso</code> (<i>via the <code>--enable-dso</code> configure option</i>)
<li><code>mod_lang</code> (<i>via the <code>--enable-nls</code> configure option</i>)
<li><code>mod_memcache</code> (<i>via the <code>--enable-memcache</code> configure option</i>)
</ul>
All of these modules would appear in the <code>`proftpd -l'</code> static
module list.
<p><a name="DSOLoadingStaticModule"></a>
<font color=red>Question</font>: If I use <a href="../utils/prxs.html"><code>prxs</code></a> to compile a module like <code>mod_ldap</code>, which is already
built into my <code>proftpd</code> as a static module, and then I use:
<pre>
LoadModule mod_ldap.c
</pre>
in my <code>proftpd.conf</code>, then which <code>mod_ldap</code> code is used,
the static module or the shared module?<br>
<font color=blue>Answer</font>: Excellent question. The short answer is: the
static module wins.
<p>
When <code>mod_dso</code> goes to load a module, it first checks to see
whether that module is already loaded -- and if so, the module will
<b>not</b> be loaded again. Static modules, by definition, are always
"already loaded". This means that your <code>mod_ldap</code> shared module
code would not be loaded, and thus would not override the static module.
<p><a name="DSOModulePathWorldWritable">
<font color=red>Question</font>: I try to start my <code>proftpd</code>
instance, but it fails to start with this error:
<pre>
Fatal: ModulePath: <i>/usr/lib/proftpd</i> is world-writable on line <i>7</i> of <i>'/etc/proftpd/modules.conf'</i>
</pre>
Why?<br>
<font color=blue>Answer</font>: The <code>mod_dso</code> module, used by
ProFTPD for DSO/shared modules, ensures that the
<a href="#ModulePath"><code>ModulePath</code></a> directory is secure. DSO
modules are code that are loaded directly into <code>proftpd</code>; loading
these modules from a world-writable directory means that <b>any</b> system user
could inject/replace any of those DSO modules with their own code, and get
<code>proftpd</code> to do whatever they wanted. Thus <code>mod_dso</code>
will <b>refuse</b> to use a world-writable directory for loading of modules.
<p>
To fix this, you simply need to ensure that the <code>ModulePath</code> directory is not world-writable, <i>e.g.</i>:
<pre>
$ chmod o-w /usr/lib/proftpd
</pre>
<p>
<hr>
<font size=2><b><i>
© Copyright 2004-2017 TJ Saunders<br>
All Rights Reserved<br>
</i></b></font>
<hr>
</body>
</html>